Naturally, energy efficiency is important. But when making your selection, remember low operating costs are little comfort if service and repair bills are high. Don’t be sold on energy efficiency alone.
Ruud is the only manufacturer to install the Compliant Scroll® Compressor, the industry best, in its entire residential heat pump line.
What Should I Know About SEER and HSPF?
The Department of Energy requires all air-conditioning and heating equipment manufacturers to evaluate and rate the efficiency of their equipment on a seasonal basis. These ratings are known as the SEER or, Seasonal Energy Efficiency Rating, for air conditioners, and the HSPF or, Heating Seasonal Performance Factor, for heating equipment.
Heat pumps use both numbers. The higher the SEER or HSPF rating, the more efficient the heat pump. High-efficiency units cost more. But since operating costs are lower, the payback period may be shorter than you realize. A high SEER/HSPF heat pump also can add value to your home which is important to today’s energy-conscious home buyers.
Are Exterior Features Important?
Absolutely. Look for features such as a louvered, galvanized steel cabinet to protect the condensing unit from outdoor hazards. And make sure the cabinet is powder-painted with a high-quality enamel for improved durability and appearance.
Are Some Brands Quieter Than Others?
With some units, the outdoor fan can be a bothersome source of noise. Ruud units have a grille design that minimizes air restriction which allows the fan to operate more quietly. Also, the fan is mounted on the underside of the grille. This protects it from the elements and it directs airflow upward, away from plants and shrubbery.
Whether its emergency furnace service or a installing a completely new system you can count on Stuck’s Heating & Cooling. Our technicians have the training and experience required to ensure your family stays comfortable all year round. For immediate service please call.
The best furnaces are efficient. They keep a home warm and comfortable. They provide steady, dependable performance year after year. And they are quiet, long-lasting and low in service frequency and cost.
Which Furnaces are Energy Efficient?
When a furnace loses or wastes heat, it requires more energy to keep your home warm. Some furnaces lose heat through the walls of the furnace cabinet. Energy-efficient furnaces like Ruud‘s full line of state-of-the-art models significantly reduce this loss with a blanket of insulation that lines the inside of the cabinet walls.
When a gas furnace is not in operation, most send a steady, wasteful draft of warm household air traveling up the venting system and out the roof. The Ruud products feature an induced-draft blower that works in conjunction with a hot surface ignition system to pull hot gases through the heat exchanger at a constant and controlled rate of flow. As the burner cycles off, the draft blower stops, keeping the heating air in the system.
Pilot lights also can be wasteful. The electric ignition in many of Ruud’s furnaces eliminates the need for a constantly burning pilot. This feature alone gives up to 6% higher efficiency. And in combination with an induced-draft blower, can improve furnace efficiencies by over 20%.
Most gas furnaces vent combustion by-products and gases by allowing the warm air to rise naturally. However, on occasion, proper venting of combustion by-products may be restricted due to blockage, deterioration of venting systems, malfunctions or other causes.
The Ruud induced-draft blower maintains a constant draft through the heat exchanger, which assures proper venting of the furnace combustion chamber. Ruud also features a pressure switch which continuously monitors venting; and in the event it senses a vent flow restriction, it will automatically shut down your heating system for your safety.
The most efficient furnaces tap the energy of the hot vent gases — which can reach temperatures of 500 degrees Fahrenheit, and more.
A high-efficiency furnace generally wears a higher price tag, but it can make up the difference by reducing operating costs over the long run. And with today’s consumer interest in efficiency, such equipment enhances the bottom line of your home.
Are some furnaces better than others?
Definitely. Features to look for include heat exchangers that resist corrosion, direct-drive blower units, induced draft blowers, pressure switches, and an insulated blower compartment, which helps minimize operating noise.
The best brands but a convincing warranty behind their work. Ruud furnaces offer one of the very best Limited Lifetime Heat Exchanger Warranties.
One in four furnaces in U.S homes today are more than 20 years old? Older furnaces were not built with the same energy-saving technology as today’s products. Your older furnace could be costing you hundreds of dollars a year between maintenance needs and energy usage.
Having your air conditioning system regularly maintained is essential to your home’s level of comfort. If your system isn’t running to the best of it’s abilities it could be consuming more energy than necessary and not providing the comfort you count on. Maintaining your home’s HVAC systems is just as important as keeping up with maintenance on your automobile.
Stuck’s Heating & Cooling can make sure your AC unit and other HVAC systems continue to run smooth and efficient. Below are a few items our technicians check for during a maintenance visit.
When its time for a new air conditioning system Stuck’s Heating & Cooling can provide you with efficient options. By providing industry leading Ruud equipment we can make sure your home stays comfortable and your utility bills stay low. We offer Ruud solutions because of the top-quality, innovative products with the latest technology, dependable performance, great warranties and excellent service and support. All of this is why we confidently say, “Welcome to the new degree of comfort.”
What do good central air units have in common? The best ones are efficient, operating on minimal electricity to hold utility bills down. They provide steady, dependable performance year after year when properly maintained. Good systems are quiet, long-lasting and low in service needs.
How can I be sure my Unit is the right size? Obviously, an air conditioner that’s too small won’t keep your home sufficiently cool. But what many don’t realize is that an over-sized system will cycle (turn on and off) more than necessary, wasting expensive energy and possibly putting undue strain on the compressor.
Stuck’s Heating & Cooling will determine the optimum size for your home by making a careful study of your cooling requirements. Window dimensions and exposure. Floor space, insulation and local climate. Heat-generating appliances. The direction your home faces. Even the amount of your home’s exterior shaded by trees.
Stuck’s Heating & Cooling can specify the cooling capacity of the system in either Btu/h (British thermal units of heat removed per hour) or refrigeration tons (one ton being equal to 12,000 Btu/h).
Much like automobile manufacturers, today’s air conditioner manufacturers are required by law to evaluate and rate their equipment according to its energy efficiency. This rating is known in the industry as a SEER, or Seasonal Energy Efficiency Rating. The higher the SEER, the more efficient the equipment.
Most new homes with central air come equipped with a standard builder’s model. However, when replacement becomes necessary, property owners can upgrade their air conditioning by specifying a more energy-efficient system.
High SEER models are generally more expensive, but can easily make up the difference by reducing your home energy bills over the long run.
Are some air conditioners built better than others? The compressor is the heart of a condensing unit. On a hot day, it works long and hard. Ruud installs the highly advanced scroll compressor in every Ruud condensing unit we produce. Scroll Compressors are recognized by the industry as the leader in reliability, efficiency and quiet operation.
Other features to look for include louvered steel cabinets that protect the coils from damage and expensive repair bills.
Also, with some condensing units, the fan can be another source of bothersome noise. Ruud units have a grill design that minimizes air restriction for quieter fan operation.
Dirty coils reduce the operational efficiency of your system, costing more in energy bills and an increase in wear-and-tear.
Too much or too little refrigerant can damage the compressor leading to decreased efficiency.
Clean and adjust blower components to provide proper system air flow for higher comfort levels.
